top of page

How to Rinse and Soak Hot Tub Filters (and When to Replace Them)

Writer: Chip & Mandy Stewart
Chip & Mandy Stewart
Nov 8
2 min read

The filter is the hardest working part of your hot tub that nobody thinks about. When it clogs, the water turns dull, the jets get weaker, and the heater has to work harder. A lot of the error codes people call us about start right here.

Turn the spa off first

Turn the spa off before you pull the filter. With the filter out, a running pump can pull debris straight into the plumbing, and you don't want to be reaching into the filter well with the pumps on.

The two-minute rinse, once a week

  • Lift the filter out and knock off any loose debris.

  • Use a garden hose with a spray nozzle, not a pressure washer. A pressure washer frays the pleats and ruins the filter.

  • Spray from top to bottom, at an angle into the folds, working all the way around. Then do the same from the inside if you can reach it.

  • Put it back and turn the spa on.

Under trees, near a gravel road, or during heavy pollen season, rinse more often. North Texas dust is a bigger filter load than most guides assume.

The overnight soak, about once a month

Rinsing gets the debris off. It doesn't get out the body oils, lotion and minerals bound into the pleats. For that you need a filter cleaner made for spas.

  • Rinse the filter first.

  • Soak it in a bucket of filter cleaner, mixed the way the label says, usually overnight.

  • Rinse it thoroughly before it goes back in. Leftover cleaner makes the water foam.

Never use dish soap, laundry detergent or the dishwasher. They leave residue that foams and throws your water balance off.

Keep a spare set

A second set of filters means you can swap in a clean, dry set and let the other one soak and dry without the spa sitting idle. A filter that dries completely between uses also lasts longer.

When to replace a filter

About once a year with normal use, or sooner if you see any of these:

  • Pleats that are frayed, torn or flattened

  • End caps that are cracked or coming loose

  • Water that stays cloudy right after a cleaning

Write the date on the end cap with a marker when you put a new one in. Then you never have to guess.

Still cloudy?

If the filter is clean and the water still won't clear, it's usually the chemistry or the water is due for a change. Call 936.333.0770 or email sales@txspaguy.com and describe what the water is doing.

bottom of page